User Manual
Table Of Contents
- Contents
- Live With Safety
- Parts List
- Service Parts
- Parts Included In Kit
- Tools and Equipment
- Customer Support Center
- Customer Personal Service (CPS)
- Cellular Service
- Basic System Layout
- Selecting Mounting Location For Communications Controller
- Installing Communications Controller
- _
- Removing Communications Controller
- Installing Communications Controller Harness
- Installing Power Harness
- Selecting Mounting Location For Antennas
- Assembling Antennas Using Mounting Bracket
- Installing Antennas Through Machine Roof or Metal Panel
- System Testing
- Vehicle Hours Synchronization
- Problem Diagnosis
- Page Numbers
Installation Instructions
CED,TX13067,2600 –19–22NOV99–1/4
Installing Communications Controller
Communications controller can be installed using hook
and hook fastener or using cap screws. Choose the best
procedure for your application.
CED,TX13067,2600 –19–22NOV99–2/4
T126195B –UN–24NOV99
1—Hook and Hook Clear Strips
2—Primer (3), part of Hook and Hook Fastener Kit
VCA10039
3—Alcohol Wipe (2), part of Hook and Hook Fastener
Kit VCA10039
Installing Communications Controller Using Hook and
Hook Fastener Kit
1. Communications controller already has hook and hook
fastener attached.
2. Clean installation area of machine using alcohol wipe
(3) then apply Primer (2) to the cleaned area. Follow
directions on primer tube.
3. Remove clear strips (1) from hook and hook fastener
and press communications controller firmly into place.
Continued on next page
DeereTrax (13APR00)
17
Installation Instructions
041300
PN=19
P R O O F P R O O F