Instruction Manual

Installation Instruction
CED,TX13067,2460 –19–03AUG99–1/2
SYSTEM TESTING
To determine if unit is functioning properly, move machine
outdoors with no overhead obstructions or power lines.
1. Engine OFF.
2. Key ON.
3. Observe CELL and GPS LED lights as ignition key is
turned ON. Both LED lights must be ON for 1—5
seconds indicating power to the communications
controller. LED lights may go OFF indicating no cellular
service or GPS lock.
4. The system will now test CELL and GPS functionality.
Both LED lights will come ON indicating successful
completion of this test. This may take 10 minutes.
CED,TX13067,2460 –19–03AUG99–2/2
T127603B –UN–22JAN00
5. Carefully remove GPS antenna cable (2) from
communications controller (1). The GPS LED light (3)
should go OFF to indicate No GPS lock.
6. With GPS antenna cable disconnected, start engine.
LED light should come ON indicating the engine is
running.
7. Stop engine. Connect GPS antenna cable.
System is OK.
DeereTrax (03FEB00) 34 Installation Instruction
020300
PN=36