Instruction Manual

Installation Instruction
CED,TX13067,2552 –19–27OCT99–6/6
T127600B –UN–22JAN00
1—Communications Controller
2—VCU10008 GPS Antenna Cable
3—VCU10004 Cellular Antenna Cable
6. Route both the cellular and GPS antenna cables to the
communication controller.
Connect cables to controller. Cable ends are different
to prevent connecting them incorrectly.
CED,TX13067,2598 –19–22NOV99–1/2
INSTALLING ANTENNAS THROUGH
MACHINE ROOF OR METAL PANEL
T126133B –UN–22NOV99
CAUTION: Never modify a Roll Over Protection
Structure (ROPS) by drilling or welding.
Structure may fail during a roll over accident.
The Falling Objects Protection Structure (FOPS)
may be modified by drilling holes up to 25mm
(1.0 in.) diameter.
1. Choose a place on the machine roof or other suitable
panel where the antennas are protected and the cables
will reach the communications controller.
For proper operation, the antenna must be mounted on
a metal surface (like a steel roof ).
DeereTrax (03FEB00) 32 Installation Instruction
020300
PN=34
Continued on next page