Instruction Manual

Installation Instruction
CED,TX13067,2597 –19–19NOV99–2/2
• Antennas may be mounted directly to a cab or
ROPS roof. Ensure all gaskets and O-Rings are
installed under antennas to prevent water entry.
Petroleum jelly may be used to prevent O-Rings
from slipping out of position.
Ensure adaquate ground plane is available (See
Installing Antennas Through Machine or Metal
Panel).
• Where antenna cables go through the roof or steel
panels, install convoluted tubing or grommets to
prevent chaffing or shorting. Make “drip loops” (2) in
cables to prevent water from running down the
cables and into the cab.
• Mount antennas where they are best protected from
damage.
• Antenna height must not exceed overall height
limitations for transporting the machine.
• Route antenna cables with existing cables or
harnesses.
DeereTrax (03FEB00) 27 Installation Instruction
020300
PN=29