Instruction Manual

Installation Instruction
CED,TX13067,2597 –19–19NOV99–1/2
SELECTING MOUNTING LOCATION FOR ANTENNAS
T128018B –UN–02FEB00
1—VCA10005 Antenna 3—VCU10008 GPS Antenna
Mounting Bracket 4—VCU10034 Cellular
2—Drip Loop in Antenna Antenna
Cables
CAUTION: Never modify by drilling or
welding a Roll Over Protection Structure
(ROPS). Structure may fail during a roll over
accident.
The Falling Objects Protection Structure
(FOPS) may be modified by drilling holes up
to 25mm (1.0 in.) diameter.
FCC Antenna Warning Label
While the device is in operation, a separation of at least 500 mm
(20 in.) must be maintained between antennae and the body of
the user or nearby persons in order to meet the FCC RF
exposure guidelines.
• Antennas must be mounted outside the cab at least
500 mm (20 in.) away from the machine operator.
• Cellular antenna should be mounted using
VCA10005 mounting bracket if possible.
• Entire length of cellular antenna must be mounted
above cab roof or any structure within 300 mm (12
in.).
• Mount cellular antenna (4) at least 300mm (12 in.)
from upright metallic structures, like mirrors. Center
of the cab roof or attached to a roof handhold is an
ideal location.
• Mount the GPS antenna (3) in an area that allows
an unobstructed view of the sky. Mounting near the
cellular antenna is OK. Use Antenna Mounting
Bracket (1) when possible.
DeereTrax (03FEB00) 26 Installation Instruction
020300
PN=28
Continued on next page