Instruction Manual

Installation Instruction

CED,TX13067,2550 –19–26OCT99–3/5

T128062B –UN–03FEB00

LED Light Harness, Communications Controller Harness and Power Harness

1—VCA10003 LED Light 3—VCA10001 4—4-pin Connector

Harness Communications 5—VCA10002 Power

2—6-pin Connector Controller Harness Harness

CONNECTING AND ROUTING HARNESSES TO

COMMUNICATIONS CONTROLLER

1. IMPORTANT: Route harnesses away from hot,

moving or vibrating components.

Do not attach harnesses to

hydraulic hoses. Avoid sharp

edges and use grommets and tie

bands where needed.

Route communications controller harness to

communications controller mounting location. Use tie

bands to secure harnesses to existing harnesses

where possible.

2. Connect LED light harness 6-pin connector (2) to

communications controller harness.

3. Connect power harness 4-pin connector (4) to

communications controller harness 4-pin connector.

Continued on next page

DeereTrax (03FEB00)

Installation Instruction

020300

PN=26