Instruction Manual

Installation Instruction

CED,TX13067,2550 –19–26OCT99–1/5

INSTALLING POWER HARNESS

T128061B –UN–03FEB00

VCA10002 Power Harness

1—4-pin Connector to 4—B+ Unswitched Power 8—D+ Switched Power

Communications Fuse (Brown Wire)

Controller 5—W+/R+ Engine Running

2—B+ Unswitched Power Fuse

(Red Wire) 6—GND (Ground) (Black

3—W+/R+ Engine Running Wire)

(Purple Wire) 7—D+ Switched Power

Connectors (Use Fuse

whichever needed)

Power Harness Electrical Requirements

Wire Color Machine Connection

Red Constant positive (+) power source. 12—24

volts typical, 36 volts maximum. With key ON

or OFF

Brown Positive (+) power source. 12—24 volts typical,

36 volts maximum. Only with key ON (0 volts

with key OFF.).

Purple Positive (+) power source. 6—24 volts typical,

36 volts maximum. With engine running.

Black Ground (GND)

DeereTrax (03FEB00)

Installation Instruction

020300

PN=24

Continued on next page