Instruction Manual

Installation Instruction

CED,TX13067,2600 –19–22NOV99–1/4

INSTALLING COMMUNICATIONS

CONTROLLER

Communications controller can be installed using hook

and hook fastener or using cap screws. Choose the best

procedure for your application.

CED,TX13067,2600 –19–22NOV99–2/4

T126195B –UN–24NOV99

1—Hook and Hook Clear Strips

2—VCU10012 Primer 97

3—VCU10009 Alcohol Wipe

INSTALLING COMMUNICATIONS CONTROLLER

USING HOOK AND HOOK FASTENER

1. Communications controller already has hook and hook

fastener attached.

2. Clean installation area of machine using VCU10009

alcohol wipe (3) then apply VCU10012 Primer 97 (2),

to the cleaned area. Follow directions on primer tube.

3. Remove clear strips (1) from hook and hook fastener

and press communications controller firmly into place.

Continued on next page

DeereTrax (03FEB00)

Installation Instruction

020300

PN=18