Operator's Manual

provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, no guarantee shall be made
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
● Consult the dealer or an experienced radio or
television technician for help.
The installer of this device should ensure that radio
frequency (RF) radiation is compliant to the
requirements set forth in Code of Federal Regulations
(CFR) 47 Section 2.1091 and 15.247 (b) (4) addressing
RF Exposure from radio frequency devices as dened in
Evaluating Compliance with FCC Guidelines for Human
Exposure to Radio Frequency Electromagnetic Fields.
RW00482,0000219-19-04APR14
CANADA
This Class B digital apparatus meets all the
requirements of the relevant Canadian Interference-
Causing Equipment and Radio Equipment Regulations.
The installer of this device should ensure that radio
frequency radiation is not emitted in excess of the
Health Canada’s requirement. Information can be
obtained online on the Health Canada website.
RW00482,00002B7-19-27MAR14
Paraguay Dealer
KUROSU & CIA. S.A.
Ruta Transchaco Km. 18.5
2040 MARIANO ROQUE ALONSO
0059521755511
AUTOMOTORES Y MAQUINARIA S.A.E.C.A
YEGROS ESQ. F. R. MORENO
00000000 ASUNCION
595-21-493-111
HC94949,0000D25-19-19MAR18
Vietnam–Declaration of Conformity
This product complies with Circular 30/2011/TT-BCT
regulating the allowable limits for hazardous substances
in electronic and electric products.
HC94949,0000BAE-19-13JUN17
Identify Date Code
PC17568—UN—16AUG13
Product Label Example
PC17574—UN—16AUG13
Date Code Example
A—Date Code (Date of Manufacture)
B—Last Two Numbers of Year of Manufacture
C—Week Number of Calendar Year of Manufacture
Use the date code (A) on the product label to identify the
date of manufacture. “YY" (B) identies the last two
numbers of the year of manufacture; “WW” (C) identies
the week number of calendar year of manufacture.
NOTE: The week number of manufacture ranges
between 01-53.
Date Code
YY Last Two Numbers of
Year of Manufacture
Example:
11 = 2011
12 = 2012
13 = 2013
WW Week Number of
Calendar Year of
Manufacture
Example:
01, 02, 03...53
HC94949,0000342-19-23AUG13
Regulatory and Compliance Information
20-2