User Manual

Installation Instructions
OUO6091,0001433 –19–14AUG01–12/27
PC6768 –UN–14AUG01
PC6769 –UN–16AUG01
PC6760 –UN–10AUG01
Template (Reference Only)
A—Template
B—Hole Guides
NOTE: Use pullout templates (included with this
instruction) to locate and drill holes at left front
section of cab. Templates below are for reference
only. If tractor is equipped with JDLINK wiring
harness, skip to step 21.
18. Install templates (A) and tape corners of templates to
brackets. Locate and mark four holes (B) for drilling.
19. Remove templates.
20. Drill four 8 mm (5/16 in) holes (B).
(09JAN02) 7 Installation Instructions
010902
PN=9
P R O O F P R O O F
Continued on next page