User Manual

Installation Instructions
OUO6091,0001433 –19–14AUG01–16/27
PC6775 –UN–14AUG01PC6939 –UN–28NOV01
A—JDLINK Wiring Harness
B—Cab Slot
IMPORTANT: Avoid damage to antenna coax cables
and JDLINK wiring harness when
reinstalling cab roof. Tie strap wiring
harness and coax cables in areas on
top of cab to prevent damage of wires
and cables (tie strap cables and wiring
harness together from right rear cab
slot to controller).
27. Route JDLINK wiring harness (A) to SCV panel
through slot (B) at right rear cab post.
OUO6091,0001433 –19–14AUG01–17/27
PC6971 –UN–20DEC01
A—JDLINK Connector And CAN Bus Terminator
Connector
28. Connect JDLINK connector to CAN bus terminator
connector (A).
OUO6091,0001433 –19–14AUG01–18/27
PC6777 –UN–14AUG01
A—Unswitch Power Wire, 262
B—Post
C—Switch Power Wire, 192
D—Power Post
29. Connect JDLINK unswitch power wire (A) to post (B)
and power switch wire (C) to post (D) with hardware
provided.
(09JAN02) 10 Installation Instructions
010902
PN=12
P R O O F P R O O F
Continued on next page