User Manual
Table Of Contents
Installation Instructions
OUO6091,0001433 –19–14AUG01–13/27
PC6773 –UN–28NOV01
21. Attach coax cables (A) to controller (B).
22. Connect JDLINK wiring harness connector (C) to
controller and tighten cap screw (D).
NOTE: Record controller’s 13 digit serial number for a
following step.
23. Install terminator (E) and retain with tie straps.
OUO6091,0001433 –19–14AUG01–14/27
PC6780 –UN–28NOV01
A—Controller
B—Cap Screws (4 used)
C—Ground Wire
D—Nut
24. Attach controller (A), using four 6 mm cap screws (B).
25. Attach ground wire from JDLINK wiring harness (C) to
controller using existing nut (D).
Continued on next page
(09JAN02)
8
Installation Instructions
010902
PN=10
P R O O F P R O O F