User's Manual

GS2 Display iTC—450 MHz RTK
Continued on next page SH20560,0000122 1905DEC091/3
RTK Main Page
IMPORTANT: Base station receiver and vehicle
receiver must be setup before operating RTK.
See RTK Base Station Setup Section.
NOTE: Check that base station and vehicle have same
Frequency, Bandwidth, Baud Rate and Network ID.
PUPC000016 —UN—08DEC09
RTK Main—Vehicle
A—The Radio ID control has
been replaced with the Radio
Frequency (MHz)
B—Only Radio is referenced on
the Configure button title.
C—The Radio Connection control
is disabled since repeaters
are not supported with the
450 MHz RTK.
RTK Main—Vehicle
The majority of the diagnostics and controls are the same
as 900 MHz RTK on the RTK Main – vehicle screen.
Three items have been modified on the RTK Main Page
for 450 MHz RTK.
Press: MENU Button >> StarFire iTC™ Button >> RTK
Softkey >> OPERATING MODE dropdown box >>
VEHICLE
StarFire iTC is a trademark of Deere & Company
203
121509
PN=23