User's Manual

GS2 Display iTC—450 MHz RTK
SH20560,0000121 1904DEC091/1
Screens Common to Standard and
450 MHz RTK
When RTK is in the OFF mode, the main pages are
common between the two systems. The details of these
particular pages are provided in the StarFire iTC and RTK
Operator’s Manual. This manual was provided with the
purchase on an iTC receiver. When in VEHICLE or BASE
mode, the pages for 450 MHz RTK system vary slightly
from the pages for 900 MHz RTK system.
There is single RTK activation that provides access to
both 900 MHz RTK and 450 MHz RTK. The difference
between the two systems is the radio hardware. After
power is supplied, the receiver links up to the attached
radio and shows the relevant screens.
The Rover Access List currently used for 900 MHz RTK is
unchanged. When upgrading to 450 MHz RTK, previous
lists remained stored in the receiver. The methods of
adding, editing and deleting Rover receiver serial numbers
remains unchanged.
Several other features in 900 MHz RTK are also provided
unchanged in the 450 MHz RTK:
•
RTKx
•
Optimized shading
•
Radio self test page
•
Absolute Base Coordinate Setup
•
TCM Calibration
Repeaters are not supported in 450 MHz system.
Because a vehicle repeater would be a mobile transmitter,
it requires a different type of license.
202
121509
PN=22