User Manual

BLACKBOX BBR64MADI & BBR64DANTE RECORDER - User Manual v3.0 Page | 7

Rear Panel

The rear panels of the BBR64MADI and BBR64DANTE BlackBox Recorders are as

follows: The areas indicated in the diagram below are explained in more detail later

in this manual.

BBR64MADI

Audio i/o on the BBR64MADI utilises either optical (SC connectors – see note below)

or coaxial (BNC connectors). These are selectable in software (see above).

Audio Clocks may be extracted from the incoming MADI data stream

(recommended), from the separate word clock input or from the BBR link RCA input

(ext clk in).

BBR64DANTE

Audio i/o on the BBR64DANTE utilises the Ethernet RJ45 connector and should be

connected using high quality CAT5E or better Ethernet cable (see above).

Audio Clocks may be extracted from the incoming DANTE data stream

(recommended), from the separate word clock input or from the BBR link RCA input

(ext clk in).

MADI i/o

Balanced

Analogue

inputs

BBR Link

USB2 Disk

Keyboard

Headphones

Timecode

and Control

Power

Word Clock

DANTE

Ethernet