Instruction Manual

3
Installation of the Sauna Room Body
1. Place the floor panel on a flat surface (Note: Before installing wall and ceiling
panels, make sure the floor is flat. If the surface is not flat, you may need shims to
achieve a flat surface.) (Picture 1).(Picture2)
2. Snap the groove of the back panel into the tenons of the floor panel.(Picture3)
3. Place the side panel into the tenons of the floor panel, and make it fit into the back
panel.(Picture4)
4. Place the front side panel on the tenons of floor panel, and make sure it is
connection to the side panels.(Picture 5)
Picture 2
Picture 3
Picture 5
Picture 1
Picture 4