Operation Manual

www.jobo.com
GB 7
3. Getting Started
Remove the protective film covering on the LCD.Remove the plastic battery insulator from the
battery compartment and make sure the remote control has a battery inside. Please refer to
“Installing & Replacing Battery” if you need a new battery.
When insert the plug and then the unit will power on, to power off press the On/Off button on the
Remote Control.
4. Operating instruction
After startup picture, there will be the menu as:
【 NAND】【SD】【USB】
【Photo】【Video】【Music】【Calendar】【File】【Setting】
User can choose desired function, and then press OK to confirm it.
The photo frame supports reading USB-disk & memory card (SD/MMC.. System will read
USB-disk firstly by default when 2 kinds of media inserted.
USB connection
When connected with a PC, it will go directly to the USB mode and display "Connecting PC ..."
message. At the same time on the PC you can see the DPF icon on the screen. Disconnect the
USB cable or press the ESC key to exit the U disk mode. The photo frame can also be used as a
card reader while connected to your PC.