User Manual
Content Introduction ............................................................................................................3 1.1. Main Features ....................................................................................................3 1.2. Specifications ....................................................................................................3 1.3. Getting Started – Set up the unit .........................................................................4 1.4.
1. Introduction Congratulations on your purchase of the JOBO Photo Display CRYSTAL10! Before operating the unit, please read this manual thoroughly and retain it for future reference. Save the original box and all packing material for future shipping needs. This Photo Display lets you view digital pictures directly from your camera's memory cards. You will be able to create a slideshow using multiple transition effects or display one picture at a time.
1.3. Getting Started – Set up the unit Open the package and remove the protective foam. Remove the protective sleeve from the unit. Install the stand of the frame at the back of the unit. Plug in the AC adapter into the power outlet. Plug the other end into the unit. After having stored the files on the target flash media (memory card or USB flash drive), insert the media into the according slot. 1.4. Control buttons and Slots 1.LCD Screen 4.MINI-USB 7.SD/MS/MMC 2.Decorative Frame 5.
1.5.
2. Operating the unit 2.1. Main menu Turning on the Photo Display , you will enter the “MENU” screen. Use the left/right arrow to go to “Set up”. Press “Auto/PLAY” button to enter the options screen. Use the Up / down arrows to choose your auto start option. Press the “Card selection” button to open the following menu: Note: In all menus, pressing the “Card selection” button will bring you back to the main menu.
Press “AUTO/PLAY” to enter the slideshow mode. Once a slideshow is playing or a picture is being shown, press the “AUTO/PLAY” button.
Press “Slideshow” button on the remote control, an audio slideshow will begin automatically.Once an audio slideshow is playing, press the “Auto/PLAY” button.
Press the “SETUP” button to display the Copy and Delete menu. Select Copy function and Press “PLAY” button to display the C:/ and D:/ menu . Use “Up/Down” arrows to select the file destination folder. Press “Right” button to confirm. Press “Auto/PLAY” to start copying the file. Pressing “STOP” button will bring you back to the Copy and Delete menu. Delete Press the “right arrow” to highlight the desired file.
5. Calendar/Clock Display When you turn on the Photo Display , you will enter the MENU screen. If you select Calendar/Clock and press “PLAY”, you will enter the Calendar/Clock menu. If the Alarm function is turned on, CRYSTAL 15 will also show the alarm time. A picture slideshow will be displayed in the picture window at the right part of the screen. 6. Troubleshooting Symptom Cause Photo Display doesn’t The POWER connector power on to the unit is not securely inserted.
Do not open the case of the Photo Display. There is a risk of electric shock, and there are no user serviceable parts inside. Opening the case will void your warranty. Do not use the Photo Display if conditions could allow condensation to occur, or damage may result. Your Photo Display is a complicated electronic device and cannot withstand shock from drops. 8. Warranty conditions This product is subject to the legal warranty periods relating to manufacturing faults and defects.
D-51645 Gummersbach E-Mail: support@jobo.com Website: www.jobo.
