User's Manual
device and Micro USB plug into the speaker, then double click the power button to enable audio
in function when the speaker power on.
Next/Previous and Volume Up/Down: Use the functions on your smart phone or music player to
control these functions.
CHARGING:
Plug the micro USB end of the charging cable into the charging port of the speaker and then
connect the USB end of the charging cable to the USB port of your PC or other USB power source.
The red LED will light up while charging (the small hole on the left corner of the micro USB). The
red LED will turn off automatically when charging is complete. It is strongly recommended that
the speaker be fully charged before first use and after long periods of inactivity. Do not
overcharge the battery.
PRECAUTIONS
Please only use the computer USB or the DC 5V power adaptor matching the Micro USB
interface to charge. Only use quality cords and adaptors.
Please keep and use in normal environments. Exposure to extreme elements such as
extreme heat and cold, fire, excessive moisture, dust, or other extreme elements may
damage the unit. Do not touch with wet hands.
Keep debris or other items from blocking the speakers or from entering any of the ports.
Do not attempt to open, repair, or take apart the speaker. The speaker may be damaged
during that process.
If the speaker quality seems lessened, or a slight popping noise is heard, it may be due to
low battery. Please recharge the speaker.
This item is not meant for children.
TROUBLESHOOTING
No Sound
Make sure that the music player is working and that the speaker is charged.
Make sure the Bluetooth™ is paired to the device you are attempting to play. (It could
automatically pair with another familiar device within pairing distance.)
Make sure the BTS500 is in the proper mode.
Not charging
Check to make sure that you are using the correct cable and that it is fully plugged into both the
device and the USB port that you are charging from. Also check to make sure the PC or other USB
charger is turned on.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.