User's Manual

BTS500 Instruction Manual

FEATURES:

1. Power: 2 Watts

2. Frequency response：200Hz-20KHz

3. Battery：300±20mAh

4. Playtime：full charged battery can work about 2-4 hours

5. Bluetooth distance：8-10M in open area Bluetooth Version: V2.1+EDR

6. Illuminated LED feature on top of speaker

OPERATION:

A long press of the power button (next to Micro USB socket) will turn on the speaker and put the

speaker into pairing mode. When waiting for Bluetooth pairing a red and blue LED next to the

Micro USB socket will flash at 0.5 second intervals.

Search for BTS500 on your device in the usual way and connect, once connected the blue LED will

light up and will flash at 1 second intervals when playing audio.

A long press of the power button will turn the speaker off.

A short press of the power button when paired will pause play on your device and a second short

press will resume play.

Connection to PC/Laptop: Connect the 3.5mm line into the headphone jack of your computer or

PAGE 1
BTS500 Instruction Manual FEATURES: 1. Power: 2 Watts 2. 3. 4. 5. 6. Frequency response：200Hz-20KHz Battery：300±20mAh Playtime：full charged battery can work about 2-4 hours Bluetooth distance：8-10M in open area Bluetooth Version: V2.1+EDR Illuminated LED feature on top of speaker OPERATION: A long press of the power button (next to Micro USB socket) will turn on the speaker and put the speaker into pairing mode.
PAGE 2
device and Micro USB plug into the speaker, then double click the power button to enable audio in function when the speaker power on. Next/Previous and Volume Up/Down: Use the functions on your smart phone or music player to control these functions. CHARGING: Plug the micro USB end of the charging cable into the charging port of the speaker and then connect the USB end of the charging cable to the USB port of your PC or other USB power source.
PAGE 3
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.