User's Manual

ManualsBrandsJMTek Technology ManualsAudio EquipmentBluetooth Speaker

BTS09 Page 1 of 5

BTS09 BLUETOOTH SPEAKER

QUICK START:



BluetoothName:BTS09



Pairing:PressandHOLDtheON/OFFbuttonuntilitBLEEPSandthenCONTINUE

toholduntiltheREDandBLUEindicatorflashedalternatively.

PACKAGE INCLUDED:

z 1x Cube Bluetooth speaker

z 1x micro USB cable

z 1x 3.5mm audio cable

z Instruction Manual

FEATURES:

z Easy pairing

z Auto-pairing function for the last paired device

z Support BQB, A2DP/AVRCP

z With Audio Out function

TECHNICAL SPECIFICATIONS:

z Bluetooth V3.0 Technology

z Bluetooth name “BTS09”

z Speaker 3W x 1, ø 40mm, frequency response 40Hz - 20kHz, impedance 4Ω±15%, distortion 7%

max (with 1kHz 1W)

Summary of content (5 pages)

PAGE 1
BTS09 BLUETOOTH SPEAKER QUICK START: Bluetooth Name: BTS09 Pairing: Press and HOLD the ON/OFF button until it BLEEPS and then CONTINUE to hold until the RED and BLUE indicator flashed alternatively. PACKAGE INCLUDED: z 1x Cube Bluetooth speaker z 1x micro USB cable z 1x 3.5mm audio cable z Instruction Manual FEATURES: z Easy pairing z Auto-pairing function for the last paired device z Support BQB, A2DP/AVRCP z With Audio Out function TECHNICAL SPECIFICATIONS: z Bluetooth V3.
PAGE 2
z Built-in 300mAh rechargeable battery z With 3.5mm audio in jack and audio out jack z Charging current : DC5V, 100-150mA z Charging time : Around 2 hours z Standby Current : 10mA z Playing time : Around 3-4 hours z Low battery indication z Effective distance: 10m (straight line without obstacle) INSTRUCTIONS: 1 2 3 Power button / Play / Pause 3.5mm Audio-out 3.
PAGE 3
z If the pairing is unsuccessful, the blue LED indicator will flash once every three seconds to show that it is unpaired. z To turn off the speaker, press and hold the POWER button (approximately 3-5 seconds) until the blue and red LED lid up simultaneously. z Please note that the Cube speaker has an auto-paired function for those Bluetooth device which paired with the Cube speaker before.
PAGE 4
Trouble Shooting OBSERVATION The unit does not work (indicator not illuminated) No sound The bluetooth do not work or cracking POTENTIAL CAUSE / SOLUTION Is the Cube speaker out of battery ? If so, charge the Cube speaker.
PAGE 5
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.