- JMR Electronics Computer Accessories User Manual

Delayed Start Option Jumper
Header W1 pins 1 & 2.
Jumper on = enabled.
Jumper off = disabled (default).
Remote Start Option Jumper
Header W1 pins 3 & 4.
Jumper on = enabled.
Jumper off = disabled (default).
Front Status LEDs
A status indicator is located on each canister. A 'Blue' light indicates normal drive
activity. A 'Red' light indicates a device fault. If all canisters display a 'Red' light
that is blinking on and off it indicates that there is a system fault. A system fault
is either a power supply or blower failure. Check the back of the unit to determine
which fault has occurred. Refer to Chapter 5
for blower fault indicator location
and to Chapter 6
for power supply fault indicator location.
FORTRA

FORCE
4
G15 & G15+ RAID System Installation Guide Rev A
4-4
Status
Indicators
A blue light on a single canister
indicates device activity or busy.
A red light on a single canister
indicates a device fault.
WARNING: Before opening the cover, disconnect the AC power cord from
both AC inlets to prevent injury.
WARNUNG: Vor dem Entfernen der Abdeckung sind beide 220V Netzkabel
(Kaltgeräteanschlußkabel) zu entfernen, um Verletzungen zu vermeiden.
W1*
Delayed Start
& Remote Start
* Located on the mid-plane
board.