- JMR Electronics Computer Accessories User Manual

4. Repeat steps 1 through 3 until all devices are installed, then move onto
step 5 to complete unit setup and installation.
5. Configure ID and other options as required. See Chapter 4
for Fibre
Channel device setup.
6. Install and configure SES and other optional features. See Chapter 8
.
7. For rackmount units, refer to Chapter 7
to install the enclosure into a
cabinet.
8. Establish host connection. See Chapter 4
for Fibre Channel host
connection.
FORTRA

FORCE
4
G15 & G15+ RAID System Installation Guide Rev A
3-3