Product Manual

SECTION 3 - MACHINE OPERATION
3-4 – JLG Lift – 3121742
Battery Charger Operation
The battery charger is located under the base frame cover
beneath the platform. (See Figure 3-2.). To access the charger,
see Figure 5-2.
Figure 3-2. Battery Charger
The charging AC input cable is located on the left side of the
machine base (see Figure 3-3.). Plug into a compatible AC power
supply, see charger specifications in Table 5-3 on page 5-3.
Figure 3-3. Charger AC Input Cable
The battery charge level can be monitored at the platform con-
trol box - battery charge indicator see Figure 3-4. or by observ-
ing the LEDs on the front of the battery charger, see Figure 3-5.
To display current battery charge status on the platform control
- battery charge indicator - both the ground and platform con-
trol, emergency stop switches must be set to the ON position,
and the enable button on the side of the platform control must
be momentarily pressed in. When the indicator is at the top of
the GREEN area that indicates a full charge. When the indicator
is in the RED area this indicates power is getting low and batter-
ies will soon need recharged.