Service Manual User guide

SECTION 3 - CHASSIS & TURNTABLE
3121262 – JLG Lift – 3-37
31. Insert the splined shaft (14) in the equipment
(6689960240).
32. Insert the 2nd washer (12) correctly in the splined
shaft (14).
33. Torque the 2 screws M5x16, grade 8.8, of the cover
to 18.4 ft.lbs. (25 Nm).
34. By using pliers, assemble the elastic ring (11) into its
seat in the splined shaft (14).
35. Insert the disengagement shaft kit (15) in the flanged
hub (31).