Service Manual User guide

SECTION 6 - JLG CONTROL SYSTEM
6-104 – JLG Lift – 3121262
33. Operate the Lift Up function switch. The control sys-
tem will stop the boom at the desired angle. The dis-
play will read:
34. Operate the Telescope Out function switch. The con-
trol system will stop the boom at the desired length.
The display will read:
35. Operate the Jib Telescope Out function to the
mechanical stop. Press ENTER. The display will
read:
36. When the control system completes the calibration
step the display will read: