Service Manual User guide

SECTION 6 - JLG CONTROL SYSTEM
6-94 – JLG Lift – 3121262
15. After visually verifying the platform is centered, hit
Enter. The screen will read:
16. After operating telescope in to verify the boom is
fully retracted, hit Enter. The screen will read:
17. Use the up/down arrows to select YES if the acces-
sory is installed, NO if it is not installed and hit enter.
The screen will read:
18. Use the up/down arrows to select YES if the acces-
sory is installed, NO if it is not installed and hit enter.
The screen will read: