Service Manual User guide

SECTION 6 - JLG CONTROL SYSTEM
3121262 – JLG Lift – 6-87
30. Press Enter. The screen shown below will be dis-
played. At this point, use the platform rotate left
function switch to swing the jib left.
31. When the jib is at the mechanical stop, press
ENTER. The screen will show:
32. At the finish of the jib swing lift calibration the jib lock
pin will be locked by the control system. The screen
will read:
33. Press ENTER. The screen will show:
34. Hitting the escape key (ESC) will take the system
back to the initial jib lift calibration display.