Service Manual User guide

SECTION 6 - JLG CONTROL SYSTEM
6-32 – JLG Lift – 3121262
1001119509A
Connector Pin Function Type
J4
(Blue)
1
AXLES SET LAMP DIGITAL OUTPUT
2
500# CAPACITY LAMP DIGITAL OUTPUT
3
BOOM CONTROL SYSTEM LAMP DIGITAL OUTPUT
4
START SWITCH DIGITAL INPUT
5
BASKET LEVEL DOWN DIGITAL INPUT
6
BASKET LEVEL DOWN DIGITAL INPUT
7
UPPER TELESCOPE IN DIGITAL INPUT
8
JIB DOWN DIGITAL INPUT
9
JIB LEFT DIGITAL INPUT
10
TOWER UP DIGITAL INPUT
11
MAIN TOWER TRANSPORT ANGLE OPEN DIGITAL INPUT
12
HOUR METER DIGITAL OUTPUT
13
BCS CALIBRATED LAMP DIGITAL OUTPUT
14
OVERLOAD LAMP DIGITAL OUTPUT
15
SPARE DIGITAL OUTPUT
16
AUXILIARY POWER DIGITAL INPUT
17
BASKET LEVEL UP DIGITAL INPUT
18
BASKET ROTATE RIGHT DIGITAL INPUT
19
JIB UP DIGITAL INPUT
20
JIB RIGHT DIGITAL INPUT
21
TOWER DOWN DIGITAL INPUT
22
MAIN BOOM TRANSPORT ANGLE CLOSED
DIGITAL INPUT
23
UPPER LIFT UP DIGITAL INPUT
24
VBAT VBAT OUTPUT
25
VBAT VBAT OUTPUT
26
NO CHARGE LAMP DIGITAL OUTPUT
27
1000# CAPACITY LAMP DIGITAL OUTPUT
28
ENGINE HIGH TEMPERATURE LENGTH DIGITAL OUTPUT
29
ENGINE LOW OIL PRESSURE LAMP DIGITAL OUTPUT
30
UPPER TELESCOPE OUT DIGITAL INPUT
31
GROUND GROUND INPUT
32
SPARE PIN GROUND INPUT
33
UPPER LIFT DOWN DIGITAL INPUT
34
SWING LEFT DIGITAL INPUT
35
SWING RIGHT DIGITAL INPUT
Connector Pin Function Type
J8
(Black)
1
GROUND FROM BATTERY GROUND INPUT
2
GROUND EMS GROUND INPUT
3
GROUND TO PLATFORM GROUND OUTPUT
4
GROUND EMS OUT TO PLATFORM GROUND OUTPUT
Figure 6-13. Ground Control Module - Sheet 3 of 3