Parts Manual Instruction Manual

3121232 15MVL 15MSP 20MVL 20MSP 4-9
SECTION 4 PLATFORM
FIGURE 4-3. PLATFORM WITH FRONT ENTRY SLIDE BAR & ROLLING EXTENSION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref Note: Available only on 15MSP, 15MVL & 20MSP Models with
CE Specs. Also available on Australian Spec SN 0130015193
to Present.
0274343 Ref PLATFORM INSTALLATION - 26in x 49in (66cm x 124.5cm) A
Ref Note: Replacement Decals Must be Ordered Separately - See
Section 8.
1 0641408 8 Bolt 1/4in-20NC x 1in
2 0860520 1 Box, Manual Storage
3 1060380 4 Cable, Lanyard
4 3311405 8 Locknut 1/4in-20NC
5 3380466 1 Panel, Control
6 3422657 4 Pin, Quick Release
7 3510874 1 Platform Assembly (See Items 101-141 for Breakdown)
8 3820024 4 Rivet
9 3820032 4 Rivet
10 4711400 16 Flatwasher 1/4in Narrow
11 4846021 2 Weldment, Platform Mount
3510874 Ref PLATFORM ASSEMBLY - 26in x 49in (66cm x 124.5cm) B
Ref (Note: Mast Mounted Lower Anchor Point (4845345)
installation is required should a Quick Change Platform
be installed in place of the standard Platform)
101 0100011 AR Compound, Locking
102 0641414 16 Bolt 1/4in-20NC x 1-3/4in
103 0641416 4 Bolt 1/4in-20NC x 2in
104 0720805 4 Bolt #8-32NC x 5/8in
105 1380132 4 Clip, Gripper
106 1703681 3 Decal - JLG
107 2020005 1 Glides, Extension
108 2410017 1 Gate, Slide Bar
109 2410019 1 Gate, Slide Bar
110 2560154 2 Grip, Handle
111 2600225 4 Hinge, Gate
112 3300356 2 Acorn, Nut 5/16in-18NC
113 3310805 4 Locknut #8-32NC
114 3311005 64 Locknut #10-24NC
115 3311405 22 Locknut 1/4in-20NC
116 3311505 2 Locknut 5/16in-18NC
117 3340829 2 Pad, Slide
118 3520030 2 Plug, Hole
119 3520169 2 Cap, Plug
120 3570274 1 Plate, Platform Pan (Extension)
121 3570362 1 Plate, Platform Pan (Stationary)
122 3570653 AR Plate, Shim
123 3570654 2 Plate, Backing
124 3900032 2 Bolt, Shoulder