Operator Manual User Manual

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
5-16 – JLG Lift – 3121230
Table 5-6. Ground Control Module Setting Range and Default Factory Settings.
Level-3: Operator Programmable Settings On LCD Display: YES =
✓ HIGH = ↑
NO = ✕ LOW = ↓
LEVEL PROGRAMMABLE ITEM
FACTORY
PRESET
SETTING RANGE
3 Back to Main — Return to Main Menu
3 Set Language
NOTE: There are two production modules available
at this time, one for North/South American
and European Languages, and one for
Asian Languages.
1 1 - English 6 - Italian
2 - German 7 - Swedish
3 - Dutch 8 - Brazilian Portuguese
4 - French 9 - Finnish
5 - Spanish
2 1 - E ngl ish 3 - Japanese
2 - Chinese
3 Set Sleep Time 5 MINS 0 - 60 MINS
3 Set Polarity of the Keypad Code LOW HIGH/LOW
3 Enable Detection of Horn Open Circuit NO (a) YES/NO
3 Enable Detection of Beacon Open Circuit NO (a) YES/NO
3 Forward Alarm Disable NO YES/NO
3 OSS Diagnostics NO YES/NO
Notes:(a) MSP Models this feature is standard equipment and preset to YES at factory.