Service Manual Manual

SECTION 3 - CHASSIS & TURNTABLE
3121142 – JLG Lift – 3-41
31. Insert the splined shaft (14) in the equipment
(6689960240).
32. Insert the 2nd washer (12) correctly in the splined shaft
(14).
33. Torque the 2 screws M5x16, grade 8.8, of the cover to
18.4 ft.lbs. (25 Nm).
34. By using pliers, assemble the elastic ring (11) into its seat
in the splined shaft (14).
35. Insert the disengagement shaft kit (15) in the flanged
hub (31).