Service Manual Manual

SECTION 6 - JLG CONTROL SYSTEM
6-44 – JLG Lift – 3121142
CALIBRATION DATA
BASKET UP XXX Displays the basket up calibration point
BASKET DOWN XXX Displays the basket down calibration point
L FWD DRIVE XXX Displays the left forward drive calibration point
R FWD DRIVE XXX Displays the right forward drive calibration point
L REV DRIVE XXX Displays the left reverse drive calibration point
R REV DRIVE XXX Displays the right reverse drive calibration point
F LT STEER XXX Displays the forward left steer calibration point
F RT STEER XXX Displays the forward right steer calibration point
R LT STEER XXX Displays the reverse left steer calibration point
R RT STEER XXX Displays the reverse right steer calibration point
U LIFT UP XXX Displays the main lift up calibration point
U LIFT DOWN XXX Displays the main lift down calibration point
U TELE IN XXX Displays the main telescope in calibration point
U TELE OUT XXX Displays the main telescope out calibration point
BM ANG 1 LO XXX Displays the boom angle 1 low calibration point
BM ANG 1 HI XXX Displays the boom angle 1 high calibration point
BM ANG 2 LO XXX Displays the boom angle 2 low calibration point
BM ANG 2 HI XXX Displays the boom angle 2 high calibration point
LEN RETRACT XXX Displays the length sensor retracted calibration point
LEN EXTEND XXXXX Displays the length sensor extended calibration point
LEN WIT XXXXX Displays the witness mark calibration point
LEN SWITCH XXXX Displays the length switch calibration point
Table 6-5. Machine Diagnostics Parameters
Diagnostics Submenu
(Displayed on Analyzer
1
st
Line)
Parameter (Displayed on
Analyzer 2
nd
Line)
Parameter Value
(Displayed on Analyzer 2
nd
Line)
Description