Service Manual Manual

SECTION 4 - BOOM & PLATFORM
4-62 – JLG Lift – 3121142
Figure 4-27. Powertrack Installation - Sheet 5 of 6
Table 4-1. Hose/Cable Pull Chart
LETTER DESCRIPTION DIM "X"
FT. (IN.) CM
A HARNESS, TRANSPORT LIMIT SWITCH (18/3 CABLE) 6 (72) 182.8
B HARNESS, BOOM ANGLE SENSOR (LEFT) (18/3 CABLE) 1.5 (18) 45.8
C HARNESS, BOOM ANGLE SENSOR (RIGHT) ( 18/3 CABLE) 1.5 (18 ) 45.8
D HARNESS, BOOM LENGTH SENSOR (18/3 CABLE) 1.5 (18) 45.8
E BROKEN CABLE PROXIMITY SENSOR (YELLOW CABLE) 5 (60) 152.4
F AC CABLE (10/3) 13 (156) 396.2
G CONTROL CABLE (18/8) 6 (72) 182.8
H TELESCOPE EXTEND HOSE (5/8 10M3K) 7 ( 84) 213.3
I TELESCOPE RETRACT HOSE (1/2 8M3K) 7 (84) 213.3
J PRESSURE HOSE TO PLATFORM VALVE (3/8 6M4K) 6 (72) 182.8
K RETURN HOSE TO PLATFORM VALVE (1/2 8M3K) 6 ( 72) 182.8
L AIR LINE (1/2 8LOLA) OPTIONAL 10 (120) 304.8
M WELD LEAD (3/0 CABLE) OPTIONAL 10 (120) 304.8
N 7500W GENERATOR (8/5 CABLE) OPTIONAL 10 (120) 304.8
NOTE: ALL CABLE/HOSE LENGTHS TO BE ± 1" (2.5 cm)
Table 4-1. Hose/Cable Pull Chart
LETTER DESCRIPTION DIM "X"
IN. CM
P LEVEL UP HOSE (PORT L1) 64 162.5
Q LEVEL DOWN HOSE (PORT L2) 64 162.5
R SWING RIGHT HOSE (PORT S1) 64 162.5
S SWING LEFT HOSE (PORT S2) 64 162.5 T JIB LIFT UP HOSE (PORT J1) 64 162.5
U JIB LIFT DOWN HOSE (PORT J2) 64 162.5
NOTE: ALL CABLE/HOSE LENGTHS TO BE ± 1" (2.5 cm)
0271800-J 0271570-K