Service Manual Manual

SECTION 3 - CHASSIS & TURNTABLE
3-76 – JLG Lift – 3121142
Motor and Brake Assembly
1. Place O-ring (27) onto end of Brake (26) and locate brake
into pilot of cover.
2. Place Gasket (31) onto the brake face and line up the
holes.
3. Place Motor (10) into Brake pilot against the Gasket (31).
4. Assemble Lift Lugs (28) onto Hex Bolts (29). Assemble
Hex Bolts (29) with Lift Lugs through the Motor (10) and
Brake (26) against the motor flange. Torque to 35 ft-lbs.
5. Fill Brake (26) with 2.7 oz. (80cc) of BRAKOILVG32
(DTE24).
10. Hyd ra ul ic Mo to r
26. Hyd ra ul ic Br ak e
27. O -R in g
28. Lift Lu g
29. B ol t
31. G as ke t
Figure 3-45. Swing Drive - Motor and Brake Assembly