Parts Manual Owner's manual

3121208 1200SJP 1350SJP 3-23
SECTION 3 BOOM
FIGURE 3-5. BOOM SENSORS AND SWITCHES INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref BOOM SENSORS AND SWITCHES INSTALLATIONS
0271621 Ref Prior to SN 0300075883 J
0273696 Ref SN 0300075883 to Present G
1 0100011 AR Compound, Locking
2 0100035 AR Compound, Locking
3Not Used
4 0630464 2 Screw, Button Head #10-24NC x 1/2in
5 0641405 5 Bolt 1/4in-20NC x 5/8in
6 2080068 6 Fastener, Insert 1/4in-20NC (Prior to SN 0300088626)
7 0791504 4 Screw 5/16in-18NC x 1/2in
8 3300430 2 Nut, Acorn 1/4in-20NC
9 12 Screw, Machine #6-32NC x 3/8in
0720603 Prior to SN 0300075883
3930606 SN 0300075883 to Present
10 0791604 AR Screw 3/8in-16NC x 1/2in
11 0791605 AR Screw 3/8in-16NC x 5/8in
12 0791606 4 Screw 3/8in-16NC x 3/4in
13 0791608 2 Screw 3/8in-16NC x 1in
14 1320130 2 Clamp, Hose
15 Not Used
16 1320301 1 Clamp, Cable
17 1671031 1 Cover, Limit Switch
18 to 19 Not Used
20 1671039 1 Cover, Jib Switch
21 2 Cover, Level Sensor Options:
Use 1671044 Prior to SN 0300073745 (was p/n 1671081)
1671044 SN 0300073745 to Present
22 3200433 1 Mount, Jib Switch
23 3311405 9 Locknut 1/4in-20NC
24 3311605 2 Locknut 3/8in-16NC
25 Use 3574431 1 Plate, Switch Mounting (was p/n 3573224)
26 3573301 2 Plate, Sensor Mounting
27 3930816 6 Capscrew #8-32NC x 1in
28 3931414 4 Capscrew 1/4in-20NC x 7/8in
29 2 Switch, Jib Limit Options: (Note: Control System must be
recalibrated when Switch is replaced)
Use 4360548 Prior to SN 0300074420 (was p/n 4360321)
4360548 SN 0300074420 to Present
30 1 Switch, Boom Length Limit Options: (Note: Control System
must be recalibrated when Switch is replaced)
Use 4360578 Prior to SN 0300074420 (was p/n 4360322)
Use 4360578 SN 0300074420 to SN 0300080279 (was p/n 4360549)
4360578 SN 0300080279 to Present (Note: P/N 4360578 does not
include #48 Connector - Purchase Separately)
31 4360527 1 Switch, Cable Break Proximity (Note: Control System must be
recalibrated when Switch is replaced)
32 Not Used
33 Use 4360543 1 Sensor, Boom Length (was p/n 4360504) (Note: Control
System must be recalibrated when Sensor is replaced)