Parts Manual Owner's manual

3121208 1200SJP 1350SJP 2-133
SECTION 2 TURNTABLE
FIGURE 2-26. 7500W SKYPOWER GENERATOR INSTALLATION - CATERPILLAR MACHINES
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref 7500W SKYPOWER GENERATOR INSTALLATION
1001117508 Ref 60Hz Spec D
1001121889 Ref 50Hz Spec B
Ref Note: SkyPower Generator is Standard On ANSI & CSA
Specs. Optional on All Other Specs.
Ref Note: See ELECTRICAL SECTION for Boom Cable Installa-
tion.
1 0100011 AR Compound, Locking
2 0100019 AR Compound, Locking
3 0100020 AR Sealant, Pipe (Not Shown)
4 0100048 AR Grease, Dielectric
5 0641404 AR Bolt 1/4in-20NC x 1/2in
6 0641508 4 Bolt 5/16in-18NC x 1in
7 0641516 3 Bolt, 5/16in-18NC x 2in
8 to 9 Not Used
10 0641618 1 Bolt 3/8in-16NC x 2-1/4in
11 0641810 2 Bolt 1/2in-13NC x 1-1/4in
12 to 14 Not Used
15 2 Box, Switch-Weatherhead Options:
0860038 60Hz Spec
See Note 50Hz Spec (Note: Not Available - Purchase Locally)
16 1 Box, Generator Control Options:
0861538 60Hz Spec
0861572 50Hz Spec
7024488 1 Card, Circuit - Generator Power (Not Shown)
See Note 1 Fuse (Note: Not Available - Purchase Locally)
7024489 1 Card, Circuit - Control (Not Shown)
Ref Note: Same Circuit Card (P/N 7024489) is used for both
60Hz & 50Hz. When replacing card, rocker switch on
card must be set for required application.
70000619 1 Harness, Circuit Card
17 1 Junction Box Assembly Options (See Items 101-128 for Break-
down):
0861542 60Hz Spec
0861567 50Hz Spec
18 0902888 1 Bracket, Generator Junction Box
19 0962520 1 Bushing, Taper
20 2820031 AR Insulator, Heat Shrink
21 3251102 1 Nameplate, Generator
22 3311508 3 Nut, 5/16in-18NC Serrated Flange
23 Not Used
24 3311801 2 Nut, 1/2in-13NC
25 to 26 Not Used
27 1001129733 1 Pulley, Belt Tensioner
28 1 Pulley, Generator Options:
3580318 60Hz Spec
3580319 50Hz Spec
29 Not Used
30 3910606 AR Screw, Round Head 6-32NC x 3/8in (60Hz Spec Only)