Service Manual Instruction Manual

SECTION 4 - BOOM & PLATFORM
4-78 – JLG Lift – 3121171
If the tower boom length sensors are calibrated and
operating properly, the control system will verify the
tower boom length readings are less than 6 in. (15.2 cm).
If the tower boom length is not within the limits, the
screen will read:
13. When the machine passes all the configuration checks,
the screen will read:
14. Enter code 55050. The analyzer will read:
WHEN THE STABILITY CONTROL IS OFF THE MACHINE WILL TIP IF USED
INCORRECTLY.
15. Press the ENTER key to acknowledge the stability control
is turned off. The analyzer should read: