Parts Manual User Manual

4-8 3120637
SECTION 4 PLATFORMS
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
S
32 3900159
Screw, Countersunk 1/2"-13NC x 3/4" (Used January
1991 to May 1992)
1
33 0100011 Loctite #242 (Not Shown) A/R
34 0901411 Mount, Rotator (Not Shown) 1
35 0641405
Bolt 1/4"-20NC x 5/8" (Used November 1991 to May
1992)
1
0235238 ROTATOR ASSEMBLY Ref. E
Note: For Machines Built Prior to September 1991
refer to Service Information Bulletin #91-5 for
required upgrade.
101 3160083
Rotator Motor Assembly (See Figure 4-4 for
Breakdown)
1
102 0080099 Adapter, Motor 1
103 2760064 Housing, Gear 1
104 0440134 Bearing, Sleeve 2
105 4740199 Washer, Thrust 4
106 0440120 Bearing, Thrust 2
107 2440043 Gear, Worm 1
108 3440816 Rollpin 1/4" x 1" 4
109 0080098 Adapter, Motor to Worm Gear 1
110 2440044 Gear, Worm 1
111 4740256 Washer, Thrust 2
112 0440135 Bearing, Sleeve 1
113 1760068 Disc, Brake 1
114 Not Used
115 3931010 Bolt, Socket Head #10-24NC x 5/8" 5
116 3441228 Rollpin 3/8" x 1 3/4" 2
117 3931620 Bolt, Socket Head 3/8"-16NC x 1 1/4" 2
118 4761600 Lockwasher 3/8" 6
119 3931612 Bolt, Socket Head 3/8"-16NC x 3/4" 4
120 4070585 Shim.010 A/R
121 4070586 Shim.005 A/R
122 4070587 Shim.002 A/R
123 0100019 Loctite #271 A/R
124 0100021 Primer A/R
125 2160001 Fitting, Grease - 90° 1
126 3020025 Grease A/R
PLATFORM WELDMENTS Ref.
201 Platform Options (Includes Items 301-307): 1
3’ x 5’ (91.5cm x 152.5cm)
3510271 Platform (Standard)
3510353 Platform with Kickplates and Slide Bar Entry
3510319 Platform with Welded-on Bumpers
3510299 Platform (Japanese Spec)
3’ x 6’ (91.5cm x 183cm)
3510272 Platform (Standard)
FIGURE 4-2. PLATFORM COMPONENTS INSTALLATION - 100HX+10/110HXER (PRIOR TO MAY
1992) (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.