Service Manual

SECTION 3 - BASE COMPONENTS

3121228 – JLG Lift – 3-25

Filter Screen Remove/Install

Pump Remove/Install

Pressure Adjust Valve Remove/Install

Pressure Check Valve - Remove/Install

Filter Screen - Remove/Install

• Requires removal of tank assembly.

1. Filter Screen 4. Tube Attach Screw

2. Pump Pick-Up Tube 5. O-Ring

3. Tube Retainer Clip

Note: Tubes shown shortened for illustrative purposes only.

Pump - Remove/Install

• Requires removal of tank assembly and pump pick-up tube.

1. Pump Assembly 3. Motor to Pump Coupler

2. Pump Assembly Screws 4. Pump Shaft Bearing

Pressure Adjust Valve - Remove/Install

1. Adjust Valve Cap 4. Valve Ball

2. Adjustment Screw 5. Adjust Valve Port

3. Valve Spring

Note: Adjust pressure per specification shown in Section-1 of this

Service Manual.

Pressure Check Valve Remove/Install

1. Check Valve Assembly 2. Check Valve Port