Service Manual

SECTION 1 - MACHINE SPECIFICATIONS

3121228 – JLG Lift – 1-1

SECTION 1. MACHINE SPECIFICATIONS

Table 1-1. 10MSP - Machine Operating Specifications

10MSP

Maximum Occupants:

Maximum Work Load (Capacity): See Table 1-2 on Page 1-2

Maximum Travel Grade (Gradeability):

(Platform STOWED ONLY) 20% (8.5°)

Maximum Travel Grade (Side Slope):

(Platform STOWED ONLY) 5°

Tilt Alarm Cut Out Limit: (Any Direction)

(Platform ELEVATED) 1.5°

Machine Height (Platform Stowed) 57 in. (1.45m)

Maximum Vertical Platform Height: 10 ft. (3.05m) - Standard

7 ft. (2.13m) - with Optional Height Limiter

Maximum Wheel Load (Per Wheel): Rear 575 lb. - Front 400 lb.

Rear 86.6 PSI - Front 151.2 PSI

Maximum Drive Speeds(Operator Variable):

Platform Elevated:

0.5 - 3.4 mph - (0.8 - 5.5 kph)

0.5 mph (0.8 kph)

Max. Platform Speeds (w/Max. Load): Platform Up: 13 sec.

Pl at for m Do wn: 9 - 1 3 s ec.

Gross Machine Weight

(machine + maximum capacity):

1950 lb. (885 kg)