Operator Manual Owner's manual

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121227 – JLG Lift – 5-11
Programming Items
Allows programming of the items shown in Table 5-4 on page 5-
12, the following is a brief explanation of each programming item.
NOTE: There are two production modules available at this time,
one for North/South American and European languages,
and one for Asian languages. All programmable items
between these modules are identical with the exception
of language selection.
• Back To Main (Menu) - When selected, will return to main
level menu.
• Set Language - Selects the language that text on the LCD
screen will be displayed.
• Set Sleep Time - Allows setting the length of time the
machine will remain powered up without control input before
powering itself down.
• Set Polarity of Keypad Code - Turns ON or OFF the Pro-
grammable Security Lock switch circuit, if equipped.
• Enable Detection of Horn Open Circuit - Enables horn
electrical circuit to be turned ON (YES) or OFF (NO) if
machine is equipped with a horn.
• Enable Detection of Beacon Open Circuit - Enables mast/
base beacon strobe electrical circuits to be turned ON (YES)
or OFF (NO) if machine is equipped with either or both bea-
con strobes.
• Forward Alarm Disable - When turned ON (YES) will disable
the alarm when driving forward.