User's Manual

DRAFT
Installation Tools
- 1/2” & 9/16” wrenches
- 1/2” & 9/16” sockets with ratchet
- electric or battery operated drill
- heat gun
- 4’ foot straight edge
- marine grade sealant
- fine point marker
- tape measure
- wire cutters
- wire strippers
- wire terminal crimpers
- razor tubing cutter or utility razor blade
- small funnel
- 7/64”, 9/64”, 5/16”, & 11/32” drill bits
- #2 Phillips-head bit or screwdriver
Hardware
- Qty(4) 5/16” x 3.5” all-thread transom mount bolts
- Qty(4) 5/16” neo-bond washers
- Qty(4) 5/16” fender washers
- Qty(4) 5/16” tall brass nuts
- Qty(2) 3/8” x 3/4" bolts
- Qty(2) 3/8” neo-bond washers
- Qty(2) #6 x 3/4” pan head screws
- Qty(4) #10 x 3/4" pan head screws
- Qty(1) rubber pump gasket
- Qty(2) ring connectors
- Qty(2) thru-hull bushings
- Qty(3) marine cable ties
- Qty(1) 5’ black mesh tubing cover
Questions? We’re here to help.
Call our technical support staff. [[phone] option 2]