Manual

JKS9800JKSTelescoping Trackbar Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Telescoping Trackbar™
Part Number: JKS9800
Applications: Jeep® Wrangler YJ, 1987-95
Welcome
CONGRATULATIONS on purchasing a new Telescoping
Trackbar™ from JKS Manufacturing. We are committed
to providing you with the best products available and your
satisfaction is our rst priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
COMPATIBLE WITH the front of 1987-95 Wrangler YJ
models only. Do not attempt to modify or install this
product on any other application or location.
NOT COMPATIBLE WITH coil-spring conversion systems.
NEVER UNLOCK TRACKBAR when operating vehicle
on public roads.
CHECK TORQUE SPECIFICATIONS regularly.
517-278-1226 • [e-mail] • www.jksmfg.com
491 W. Gareld Avenue, Coldwater, MI 49036
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 1-1/8” and 9/16” Open-End Wrenches
 Drill with 1/2” Drill Bit
 Grease Gun with Zerk Fitting Coupler
 Wheel Bearing Grease
 Welder *
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions rst to determine which tools
will be required for your application.
Parts
Description
A
Outer Tube (Chassis End)
B
Slip Shaft (Axle End)
C
1/2” Ovalok Nut
D
3/4” Teon Lined Rod End
E
3/4” Jam Nut
F
Polyurethane Dust Boot
G
1/2” x 3” GR8 Bolt
H
3/8” x 1-3/4” GR8 Bolt
I
3/8” Nylock Nut
J
Clamp
K
Grease Zerk Cap
L
Grease Zerk
M
1/8” Shoulder Spacer (narrow)
N
1.85” OE Bracket Spacer
O
5/16” Shoulder Spacer (wide)
P
1/2” x 4-1/2” GR8 Bolt