Data Sheet

JK Audio
© 2019, JK Audio, Inc.
1311 E. 6th St. Sandwich, IL. 60548
jkaudio.com
[e-mail]
800.552.8346 • 815.786.2929
Se Habla Español
Voice Path™
Telephone Handset Audio Tap
Tap Your Phone with 3.5 mm Mini Jacks.
Voice
Path continuously routes both sides of your conversation
to the mic input of your PC (or Mac) sound card. Simply
press in the gray button when you are ready to play
audio recordings back into the phone line. With the
button in, Voice Path will disconnect the microphone
from your handset and send audio down the phone line
and into your receiver. You will hear the transmit audio
as well as the voice from the other end of the call.
Record and Play Audio Clips. Endless possibilities
such as: News rooms, Weather and Trafc reports, Ad
Creation and Proong, Transcribing, Voice Mail Prompts,
Production Room...Simply connect between the handset
and base of your telephone. The attached cables connect
directly to the in and out jacks of your sound card. Use
your PC software to record, edit, and then play your
conversation right back into the phone line.
Phone Compatibility. When sending audio into
a telephone, Voice Path must emulate the microphone
that is in the handset. A switch on the back of Voice
Path allows you select between the three basic types
of handset microphone: electret, dynamic, and carbon.
Signal level to the PC sound card is also adjustable. Voice
Path will not work with telephones that have a keypad in
the handset.
SPECIFICATIONS
Input
3.5 mm TRS
(Left Channel Only):
10k ohms /
250 mV nominal
Output
3.5 mm TS
(Mono):
2800 ohms
100 mV max
Phone Line:
RJ22
Handset Type:
Electret, Dynamic, Carbon
Size:
3” x 1” x 2” (7.6 x 2.5 x 5.1 cm)
Weight:
9 oz
Isolation
Transformer
Output
Level
3.5 mm
Mono Plug
Output to PC
Handset Jack
from Handset
Handset Jack
to Phone
Handset Mic Type Switch
Isolation Transformer
Signal Limiter
3.5 mm
Stereo Plug
Input from PC
FEATURES
QT T1 T2 VP
» Works with Analog, Digital, PBX,
or VoIP Telephones
• • • •
» 1/8" (3.5mm) Mono Audio Input
•
» 1/8" (3.5mm) Mono Audio Output
• •
» RCA Input & Output
• •
» XLR Input & Output
•
» Input Level Control
•
» Output Level Control
• • •
» Switch Selects Between Carbon,
Dynamic or Electret Handset Types
• •
» Passive Design.
No Battery or AC Required
• • • •
QuickTap, THAT-1 and THAT-2 are shown for comparison:
QT = QuickTap T1 = THAT-1
T2 = THAT-2 VP = Voice Path
BLOCK DIAGRAM
Computer