User Manual

Connection

1. Connect your audio equipment, microphones, cue input, and

headphones to the input and output jacks on RemoteMix 4.

2. (a) Connect the jack marked "Phone Line" to any standard

analog telephone line, or

(b) Disconnect the handset on an existing telephone and plug the

coily cord from the phone into the Universal Handset Inter-

face jack on RemoteMix 4, or

jack on your cellular telephone using the supplied JK Audio

interface cable.

The 1/4” Wireless Interface jack also serves as a Cue Input

that feeds the headphones. Connect any line level output

here, such as the output from your personal audio player.

This signal does not reach the XLR output but will be present

on the right channel (return) of the stereo output.

3. Turn on the power switch, flip the "Phone Line" switch to "Dial/

Talk", flip the keypad switch to “On” (only if dialing with the Re-

moteMix 4 keypad) and dial your call. You are now ready to

broadcast or record a telephone interview.

2. (a) Standard

single analog

telephone line

2. (b) Handset jack

on PBX telephone.

Set A-B-C switch for

best audio.

2. (c) Cell Phone

connection using

wireless phone

cable provided