User Manual

Connecting—Bluetooth Wireless Technology

Now go to your Bluetooth device and search for Bluetooth connec-

tions. If this is the first time you have paired with this device you will

first need to select the option to add an audio device. Wait until the

cell phone has found the new Bluetooth device. Select from the list

the ID of "JKRM4xxx" where “xxx” corresponds to the last 3 digits of

the unit’s serial number. Enter “Yes” when asked to “Bond” with this

device. The pin is "0000". (Earlier units with serial numbers up

through RM401124 use a unique pin of 4xxx) When bonding is com-

pleted, the blue LED will flash at a rate of 1 second on, 2 seconds

off. Once RemoteMix 4 has been added to your cell phone, subse-

quent connections can be made more quickly from Idle Mode.

While all phones and portables are different, typically if you connect

in cell phone hands free mode, you will have a mono duplex connec-

tion. If you connect to a music player, you will be in stereo

mode. Consult your cell phone or portable device for more details.

The Bluetooth interface will first attempt to connect in hands free

mode to a cell phone, allowing 3.4 kHz telecom bandwidth. If this is

not available, it will attempt to connect in wireless headset mode to

any product that allows a Bluetooth wireless audio connection. The

wireless headset mode offers 20 kHz audio bandwidth.

To disconnect from the Bluetooth device, simply pull up on the

Bluetooth multi-function switch and hold for 5 seconds. If left un-

used in Idle mode or if a live call is disconnected, the RemoteMix 4

will automatically disconnect Bluetooth in two minutes.

Bluetooth LED pattern after Bonding

Bonded

2 seconds off,

1 second on