User Manual

Connecting—Bluetooth Wireless Technology

Establishing a Bluetooth connection varies with different cell

phones. On your phone, find and select the option to set up a con-

nection. Monitor the Bluetooth audio path on headphones in the

"Return" position on the RemoteMix 4. Pull up on the Bluetooth

multi-function switch on the front of the RemoteMix 4 and hold for

approximately 5 seconds. You will hear a beep in your headphones,

followed by a second beep or beeps. The blue LED will begin to

flash rapidly as RemoteMix 4 enters Pairing Mode.

There is a difference between “Pairing Mode” and “Idle Mode” on a

Bluetooth device. The very first time you connect to a new device,

you must be in Pairing Mode. When you hold the Bluetooth switch

up, the blue LED will come on steady for a moment, then it will flash

at a rate of 200 ms on and 200 ms off. This first stage is Idle Mode. If

you continue to hold the switch up, the LED will flash rapidly, about

every 100 ms. This is Pairing Mode. Once in pairing mode, any

Bluetooth enabled device within range can pair with RemoteMix 4.

After pairing is complete, the connection to that device is secure.

Idle Mode

200 ms off,

200 ms on

Initialize

2 sec off,

2 sec on

Bluetooth LED pattern to initiate Bonding

Pairing Mode

100 ms off,

100 ms on

Hold Bluetooth switch up > 5 sec to reach Pairing

Mode the first time a new device is connected,

> 2 sec thereafter to connect from Idle Mode