QuickTap™ Telephone Handset Tap User Guide JK Audio
Welcome Thank You Thank you for purchasing the JK Audio QuickTap™. Please read this guide for instructions on using it. Getting Assistance If you have technical or application questions: In the US & Canada, call us toll free at: 800-552-8346 All other countries dial: 815-786-2929 (M-F 8:30-5:00pm Central Time Zone) Email us at: support@jkaudio.com Or, check out our FAQ section for answers to common questions.
Contents Overview 1 Setup 2 FAQs 4 Technical Information 5 Note: While QuickTap was designed to be very rugged and durable, it is not waterproof and care should be taken to keep the unit dry.
Features Works with Analog, Digital, PBX, and ISDN Telephones 1/8” (3.5mm) Mono Audio Output Use the QuickTap to Get Audio into a Sound Card or Portable Recorder Passive Design.
Overview Introducing QuickTap Quick and Simple. Connect QuickTap between your telephone and handset for quick access to audio from any telephone. The Output Jack provides a mix of both sides of the conversation. In other words, whatever you send down the phone line will come back on this jack mixed with the audio from the other side of the call. The QuickTap does not work with cellular telephones or any telephone with a keypad in the handset.
Setup MIC 00:00:00 OR 2 QuickTap Telephone Handset Tap L R PLAY/REC MENU 1 2 3 4 5 6 7 8 9 * 0 #
Setup Connection Install QuickTap between the handset and the telephone base of your existing telephone. 1. Unplug the handset cord from your telephone base. 2. Using the black handset jumper cord that we have provided, connect the telephone jack of QuickTap to the handset jack on your telephone base. 3. Plug your handset cord, and handset, into the handset jack on QuickTap. 4. Connect your audio equipment to the line output jack on QuickTap.
FAQs Will the QuickTap work with my telephone? The QuickTap will work with virtually any telephone that is not cellular and does not have a keypad in the handset. It is compatible with analog, digital, PBX, and ISDN telephones and systems. We cannot guarantee that it will work with every telephone out there, but we have yet to hear of one it does not work with.
Technical Information Specifications Line Out 1/8” (3.5mm) Mono: 600 ohms, 100 mV RMS (-16 dBu nom) Misc. Handset Connectors: RJ22 Size: 2" x 2" x 1.3" (5.1 x 5.1 x 3.3 cm) Weight: 3.
FCC Registration Your new JK Audio product has been registered with the Federal Communications Commission (FCC). This product complies with the standards in Part 68 of the FCC rules. 1. Connection And Use With The Nationwide Telephone Network The FCC requires that you connect this telephone equipment to the national telephone network through a USOC RJ-11C modular telephone jack. This equipment may not be used with Party Line Service or Coin Telephone Lines. This equipment is hearing aid compatible.
FCC Registration 3. Repair Instructions If it is determined that your telephone equipment is malfunctioning, the FCC requires that it not be used and that it be unplugged from the modular outlet until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents or by others who may be authorized by the FCC. For repair procedures, follow the instructions outlined under the warranty section of the manual. 4.
QuickTap™ Telephone Handset Tap User Guide Version 4/16/22 JK Audio, Inc. 1311 E 6th St. Sandwich, IL 60548 United States Telephone: 815.786.2929 Toll Free: 1.800.jkaudio Fax: 815.786.8502 www.jkaudio.com © 2022 JK Audio, Inc. All rights reserved.