Data Sheet

JK Audio
© 2019, JK Audio, Inc.
1311 E. 6th St. Sandwich, IL. 60548
jkaudio.com
[e-mail]
800.552.8346 • 815.786.2929
Se Habla Español
FEATURES
QT T1 T2 VP
» Works with Analog, Digital, PBX,
or VoIP Telephones
• • • •
» 1/8" (3.5mm) Mono Audio Input
•
» 1/8" (3.5mm) Mono Audio Output
• •
» RCA Input & Output
• •
» XLR Input & Output
•
» Input Level Control
•
» Output Level Control
• • •
» Switch Selects Between Carbon,
Dynamic or Electret Handset Types
• •
» Passive Design.
No Battery or AC Required
• • • •
QuickTap™
Telephone Handset Tap
Quick and Simple.
Connect QuickTap between your
telephone and handset for quick access to audio from
any telephone.
Record Simple Interviews. Simply unplug the
handset coily cord from the base of your telephone
and plug it directly into the QuickTap. Then, using the
supplied cable, connect the QuickTap to the base of
the telephone. Now connect your audio equipment or
powered speaker to the audio output jack. This jack
contains a nice mix of both sides of the conversation, as
well as the tones being pressed on the keypad.
The QuickTap does not work with cellular telephones or
any telephone with a keypad in the handset.
SPECIFICATIONS
Line Output
1/8” (3.5mm) Mono:
600 ohms
100 mV RMS (-16 dBu nom)
Phone Line:
RJ11C
Handset Type:
Electret
Size:
2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm)
Weight:
3.4 oz
Isolation
Transformer
1/8"
Output
Handset Jack
from Handset
Handset Jack
to Phone
BLOCK DIAGRAM
THAT-1, THAT-2, and Voice Path are shown for comparison:
QT = QuickTap T1 = THAT-1
T2 = THAT-2 VP = Voice Path